 |
Main Module: Set of PMMA attenuation plates: 6x10mm thick and 2x5mm thick;
one plate contains marking of the reference point.
|
 |
CNR Module: 10mm thick module containing a 20 x 20 x 0.2mm aluminium filter,
located 6 cm from the chest side.
|
 |
Contrast Detail Module: 20mm thick module containing gold (99.99%) discs organized in a
7x14 matrix (diameter x thickness). Discs have following diameters: 0.1, 0.25, 0.5,
0.75, 1.0, 1.5, 2.0mm and 14 thicknesses ranging from 0.03 to 2.0µm. Thickness
accuracy: 1nm (0.001 µm), diameter accuracy 0.001mm (1µm)
|
 |
Ghosting Module: 10mm thick module containing a 30 x 30 x 0.1mm aluminum filter for a
ghost test.
|
 |
Resolution and Geometry Module: 10mm thick module containing:
pattern for the line pair resolution evaluation (from 1,5 to 20,0 LP/mm) rotated 45°
8 low contrast objects (ø 5.5mm and depth from 0.1mm to 0.45mm)
3 objects of a different absorption level.
pattern for evaluation of the effective radiation field.
|
 |
MTF Module: 10mm thick module containing a straight stainless steel edge accurate
to ±2µm at a 3° angle.
|
 |
Artifact Evaluation Module: 10mm thick module containing a mesh for artifact evaluation.
|
 |
Filaments Module: 10mm thick module containing 6 groups of multi-directional filaments
0.40mm to 0.20mm in diameter.
|
 |
Dynamic Range Module: 10mm thick module containing Al step wedge with 14 steps from 0.0 to 5.2mm
|
 |
Geometry Distortion Module (scales): 10mm thick module containing a grid with scales.
|
 |
Geometric Distortion Module (mesh): 10mm thick module containing a wire mesh of horizontal,
vertical and diagonal lines (45°)
|
 |
ACR Accreditation Module: 14mm thick module containing a wax insert like in Pro-MAM
Accreditation (when used with 3x10mm plates from main module simulates 42 mm compressed
breast of average glandular/adipose composition.)
|
 |
Full Field ACR Accreditation Module: 14mm thick module containing a wax insert like
in Pro-MAM Accreditation FF (when used with 3x10mm plates from main module simulates 42 mm
compressed breast of average glandular/adipose composition.)
|
 |
Noise Evaluation Module: 2mm thick aluminum plate 200x200mm.
|
 |
Spacers Sets: 180x15 or 240x15mm PMMA plates:
4 pieces 10 mm thick,
2 pieces 8 mm thick,
2 pieces 5 mm thick,
2 pieces 2 mm thick.
|
 |
Compensation Module: set of 10 PMMA plates 40x20x2mm
|
This versatile phantom can be used for monitoring technical parameters of digital mammography imaging systems according
to the requirements of the ”European Guidelines for Quality Assurance in Mammography Screening” and IEC 61223-3-2:
