 |
|
|
|
| Steel Wool Recovery Canisters and Accessories. |
 | Steel Wool Silver Recovery Canisters Featuring Steel Wool Inserts. How These Canisters Work... As used fixing solution or wash water passes through the steel wool fibers, the silver ions in solution exchanges with the iron ions in the steel wool. The silver ions combine with sulfur and forms a precipitate that falls to the collection chamber in the bottom of the canister as 'sludge'. The 'up-flow' design of the Rotex canister allows most of the precipitate to fall freely and not plug up the steel wool. Some of the silver-bearing precipitate is likely to adhere to the steel wool fibers and both the used steel wool and sludge are smelted in a reverberatory furnace to recover the silver. A single pound of steel wool may recover as much as 6 to 9 Troy Ounces of silver in normal operation. Time of contact between the solution and the steel wool is very important for the exchange to take place. If the solution passes through too quickly some silver will not be trapped. A very high flow may even wash out the sludge. At the recommended flow rates, solution entering the steel wool at 50ppm (parts per million) also defined as 50 mg per litre - will usually give up approximately 95% of its silver and exit the canister well below 5 ppm. Where environmental protection requires that the solution be stripped to 1 or 2 ppm, a second canister is connected in series to the first. Use a taller model for the secondary canister. Smaller bucket is 3.5 gallons, 10.25" high, larger bucket is 5.0 gallons, 14.25" high. Handle folds down when not in use so if you're limited in space can be left down until needed. |
| Type C (Coarse Grade) - For use with graphic arts and X-ray fixers with 'Part B' hardeners; color paper
bleach-fix and E-6 color slide fix. Type M (Medium Grade) - For use with other black & white fixers without 'Part B' hardeners; C-41 Fixers and stabilizers; fixers for microfilm and Cine films; wash water. Standard Features:
High-efficiency up-flow design
Peel-off cover for easy refilling Gasketed cover for transporting Tubing connectors for both 1/2" and 5/8" i.d. tubing. Tubing connectors for 3/4" i.d. tubing Recyclable HDPE plastic construction Available Options:
By-pass kit
1/2" male pipe thread x 3/8" i.d. tubing adapter to connect to cubetainer hose Wheeled dolly for size -24 Fill pails FP3, FP5, FP7 for batch filling Accessories:
Fill Pails: These sit on top of a canister to allow for slow manual flow through filling/processing
through steel wool canisters. Includes flow regulator.
Neutralizer Pail: Includes 3 inlets and one drain outlet. The purpose is to mix the discharge fixer, developer, and wash water together before exiting to the sanitary drain. |
|
 |
|
